• أنشطة الشركة : صناعة وتجميع مستلزمات شبكات الغاز والاجهزة الطبية انتاج محطة توزيع الرئيسية للغازات الطبية و مخفض غازات طبية و مخرج غازات طبية و فلوميتر غازات طبية (أوكسيجن-هواء) و منظم شفط و برطمان شفط و وحدة خدمة المريض و بندانت لزوم غرف العمليات و أنظمة الريل وأجهزة أنذار الغازات الطبية

    الشعبة : صناعة الأجهزة الطبية

    القطاع : مستلزمات طبية

    المحافظة :

    المدينة : المنوفية

    عنوان الإدارة : 75 أ ش مصر والسودان حدائق القبة القاهرة

    التليفون : 01002628272

    الفاكس : 048_2590101

    البريد الإلكتروني : gmdme2000@yahoo.com,,ahalim@imc-egypt.org,ms_medicals@yahoo.com

    الموقع علي الإنترنت : http://www.msmedical-eg.com/

  • أسم المنتج : مستلزمات الطبية

    تفاصيل المنتج : MS Medical (Automatic central station) Specially designed for distribution of medical gases. And ensures Completely safe continuous gas distribution. Advantages: - This Automatic central station is enable gas stored under High pressure (200 bars) in cylinders to be reduced to (10 bars). - Supply continuous gas distribution though automatic switching to a reserve source before exhausting the source on duty. Applications: This Automatic central station are specially manufactured and designed for distribution of medical gases (O2 - N2O - etc…). Operating Principle: Two pressure reducers limited at 10 bars Are Connected to Automatic Change over of the station one bank of Cylinder is open first and the second bank of cylinders after the first opened bank will be on duty and the second will be the reserve source. On duty source will supply gas as far as the output pressure is deficient (∆ P for change over is 2.5 bar) when on duty source is exhausted, output pressure decreased and the change-over switch on the reserve source and pressure increase again. Technician only exchange empty cylinders. Specifications: - Flow rate ……………………………………………… up to 50 m3/h - Flow rate ……………………………………………… up to 100 m3/h - Flow rate ……………………………………………… up to 160 m3/h - Storage capacity ……………… from 1 to (n) cylinders connected in series - Maximum Authorized service pressure …………… 230 Bar (ISO DIN 10289) - Nominal pressure ....................... 200 Bar at 15°C - ∆ P for Automatic Change over ……………… 2.5 Bar maximum

  • أسم المنتج : مستلزمات الطبية

    تفاصيل المنتج : Pressure Regulator 1- Manufacactured from brass with the ability of decreasing the inlet pressure from 12 bar to 600m bar. 2- Outlet pressure gauge (From 0 to 16 bar). 3- Fixed plate. 4- Valve for measuring the wanted Outlet pressure. 90901899 - O2 Oxygen regulator 90901899 - N2O Nitrous oxide regulator 90901899 - Air 4 BAR Air regulator 90901899 - Co2 Co2 regulator 90901899 - Nitrogen Nitrogen regulator 90901899 - Argon Argon regulator

  • أسم المنتج : مستلزمات الطبية

    تفاصيل المنتج : Second Stage Regulator MS Medical Second stage Regulator has been specially design for decreasing pressure until the normal working pressure in the hospital. Second stage Regulator can work As V.S.P valve in emergency case because It can contact directly With gas cylinder. So the second stage regulator can work instead central station in case of emergency. Specifications: 1- Manufactured from brass plated with nickel Krum. 2- Decreasing pressure from 12 bars to 600m bar. 3- Inlet pressure gauge (from 0 to 16 bars). 4- Outlet pressure gauge (from 0 to 10 bar). 5- Tow emergency valve (able to contact with cylinder). 6- (Open – close) inlet pressure valve. 7- (Open – close) outlet pressure valve. 8- Measure valve for the wanted pressure. 9- Fixing plate.

  • أسم المنتج : مستلزمات الطبية

    تفاصيل المنتج : MS Medical Flow Meter is used to adjust and measure the wanted flow of gas for patient. The flow meter should be connected to a source of pressured gas on the wall using direct probe or rail system. The oxygen flow meter must be fitted with humidifier or an outlet tubing apple combined with an Oxygen mask or Cannula. - Chromium-plated brass body (high shock resistant) - Polycarbonate reading scale and scale caver - Flow rate available: 0-15L/min - Filter at the scale inlet: patient and flow meter protection - Knob: Easy to maintain, offers optimum adjustment quality - Available with French, BS and DIN standard - Identification ring allows immediate identification and also indicates the name of the gas

  • أسم المنتج : مستلزمات الطبية

    تفاصيل المنتج : Cylinder Pressure Regulator The MS Medical cylinder pressure regulator, connected to an Oxygen, Medical Air or Nitrous Oxide cylinder, is used to regulate the gas pressure by. 90901926 Supplying the operating outlet Pressure with a controlled and stable pressure (4bar) Combined with an Ms Medical flow meter 0-15L/m, The MS Medical pressure regulator makes it possible, from a cylinder, to adjust and Measure the flow rate of a gas that is needed to the patient through the respiratory Tract. Fitted with a quick-release outlet connector, it can be connected to any type of Emergency respiratory device.

  • أسم المنتج : مستلزمات الطبية

    تفاصيل المنتج : Vacuum Regulator The Purpose of MS Medical vacuum regulator is to measure and adjust the vacuum level. 90901906 It is used to remove substances from the Patient`s body during Surgical and other procedures the vacuum regulator should be connected to a wall source of vacuum, using a direct probe or through a rail system. - Available for several vacuum levels: 0-1000, 0-600 and 0-250 mbar. - Vacuum gauge filled with a protective hamper device. - ON/Off Knob allowing for the quick restoration of a readjusted vacuum level. - Central adjustment knob. - Polycarbonate 150 CC safety jar, Autoclavable at 121°c & 134°c, unbreakable and fitted with an anti cover flow safety device.

  • أسم المنتج : مستلزمات الطبية

    تفاصيل المنتج : Vacuum Jars MS Medical Vacuum jars are used to collect liquids or mucus from the medical suction. 90901910 Our vacuum jars are all unbreakable and Autoclavable (121ºC & 134ºC) with capacity of 2 L. All Our vacuum jars are fitted with an extremely simple Anti over flow safety device. Our 2L Polycarbonate Jars have a moulded hanger making the use of a basket unnecessary. - Our vacuum jars are Autoclavable 121ºC & 134ºC. - Our vacuum jars have the advantages of easy use and MS medical offers you wide range of accessories. - Metal Baskets, floor stands, universal rail adaptors and Aluminum wall brackets.

  • أسم المنتج : مستلزمات الطبية

    تفاصيل المنتج : Venturi MS Medical Venturi operated by compressed Air or Oxygen at working. 90901925 How to use the pressure to generate vacuum so MS Medical Venturi use Oxygen or Medical Air to generate Vacuum. Supplied as standard with a safety jar with overflow safety device and antibacterial filter or with an outlet tubing nipple. Polycarbonate 150 CC safety jar, Autoclavable at 121°c & 134°c, unbreakable and fitted with an anti cover flow safety device. MS Medical Venturi offered in AFNOR, DIN, & BS Standard also can be connected On rail system. Feature Highlights: - Maximum vacuum level: - 750 mbar - Vacuum Flow rate: - 25lpm - Consumption: - 10% in LPM of the adjusted vacuum in mbar - Vacuum gauge graduated from 0 to 1000 mbar

  • أسم المنتج : مستلزمات الطبية

    تفاصيل المنتج : Medical Bed Head Unit MS Medical Bed head unit is built around a Specially profiled aluminum Section which provides Linear rigidity for mounting on imperfect walls and intensive use. 90901913 - Unless otherwise required, the unit are Supplied in standard Lengths of 1.50, 3.00 and 4.5m for Patient rooms with one, Two or Three beds. - Our bed head unit has individual compartments so that the gases are separate from the electric services. - Can be quickly installed without being dismantled. - Our bed head unit available in several colors. - There are Two lights in MS medical Bed Head unit: 1- Direct Light Lamp (60 cm 18 w) 2- In Direct light lamp (120cm 36w) - The Bed Head unit accessories. - Direct Light switch. - In Direct Light Switch. - Electricity Sockets. - Telephone Socket. - Nurse Call. - Medical gas outlets.

  • أسم المنتج : مستلزمات الطبية

    تفاصيل المنتج : Ceiling Pendant 90901915 Function: MS Medical Ceiling Pendant Function Distribution of medical gases and electricity in Operation theatres for surgeons and anesthetists. The Pendant is designed to carry up to 30k.G of equipment-electro-surgical Unit, monitor, etc. Constructions: - 2 Distribution ducts in anodized extruded aluminum length 0.60m - Horizontal plane rotation adjustable up to 340° - Optional accessories on Request including - Medical gas outlet (02 - N2o - Air - Vacuum - Surgical Air) - Electrical Socket 220V - Option of scavenging outlet (AGSS type)

© 2017 جميع الحقوق محفوظة لغرفة الصناعات الهندسية

الغرفة منشأة بالقرار الجمهوري رقم 453 لعام 1958 وهي واحدة من 20 غرفة صناعية أعضاء اتحاد الصناعات المصرية و تضم حوالى4000 عضوا , بموجب قرار الإنشاء فهي تغطي قطاع الصناعات الهندسية في مصر من خلال 10 شُعب .

أحدث الشركات المضافة

إتصل بنا

البريد الإلكتروني: info@ceiegypt.org

العنوان: 1195 كورنيش النيل بجوار هيئة الكتاب - الرقـــم البريـدي 11511 ص ب 261 القاهرة